Clean surface throughly, removing all dirt. Cover adjacent areasto protect from spray mist. Shake can vigorously for one minute before spraying and occassionally while in use to ensure uniformity and prevent clogging. On previously painted surface test spray in a small area. Hold can 30-40cm from surface to be sprayed. Press button firmly with steady even strokes while moving can back and forth. 2 or 3 coats with intervals of 10 mins. are better than pn continous heavy coat. Should paint bubble or run, you are to close to the surface or spraying too heavily. After use,turn can upside down and depress valve button for several seconds to clear valve until only gas emerges to prevent clogging. HEALTH & SAFETY PRECAUTIONS: 1.Contents are extremely inflammable under pressure. 2.Use only as directed. 3.Keep away from heat open flames.Spark and any other source of fire. 4.Do not puncture or incinerate container even when empty. 5.Avoid contact with eyes flush repeatedly with warm water and contact physician immediately. 6.Keep out of reach of children. 7.If swallowed, do not induce vomiting call physicioan immediately. VALIDITY :3 YEARS PRODUCTION DATE: PLEASE SEE CAN BOTTOM!