Maximum 4 Gallons Per Check Out.

Ready to use

Perfect for installing hard wood and soft wood floor tiles on concrete, particle board or plywood subfloors

No need to mix / mess. Wipe off excessive glue with wet cloth for an easy cleanup

Application procedure as Plaster Bonding:

1. Shake contents well before using

2. Remove loose particles like dust or oil from base concrete to be plastered

3. Brush or spray Stikwel Plaster Bonding Glue evenly on concrete surface

4. Allow glue to dry to a translucent film for about 20 to 30 minutes. Surface is now ready for plastering.

Application procedures as Mortar Admixture

1. Shake contents well before using

2. Dilute Stikwel Plaster Bonding Glue with water at ratio 1:1 and mix well

3. Use the diluted Stikwel Plaster Bonding Glue as admixture by adding it to water, cement, and sand in the mortar mix

4. Mix mortar well to your desired working consistency

5. Proceed with the usual plastering procedure