PolyWood™ is a wood mimic filament without actual wood powder, which removes all risks of nozzle clogs. PolyWood™ is made entirely with PLA using a special foaming technology. It exhibits the same density and appearance as wood. Jam-Free™ technology improves the heat stability of Polymaker’s PLA filaments with softening temperatures over 140 °C. As a result, Polymaker’s PLA filaments show minimal softening in the “cold end” and can melt rapidly once entering the heating zone, leading to excellent printing quality with zero risk of nozzle jams. PRINTING SETTINGS: Nozzle Temperature: 190˚C – 210˚C Printing Speed: 35mm/s – 50mm/s Bed Temperature: 25˚C – 60˚C Bed Surface: Glass with glue, blue tape, BuilTak® Cooling Fan: ON Printing conditions may vary with different printers and nozzle diameters Mechanical Properties: Young’s Modulus: N/A Tensile Strength: 23.2 ± 0.4 Mpa Bending Strength: 52.9 ± 0.3 Mpa Charpy Impact Strength: 2.1 ± 0.2 kJ/m2 Thermal Properties: Glass Transition Temperature: 62˚C Vicat Softening Temperature: 60˚C Melting Temperature: 151˚C Notes: Drying Settings: 70˚C for 8h Recommended Support Materials: PolyDissolve™ S1