Meguiar’s sophisticated Hybrid Ceramic chemistry makes this product as easy to apply as an ordinary liquid wax! Engineered to be applied by either hand or dual action variable speed polisher (DA polisher), this formula produces a slick, protective, water beading layer that seals your paint from the environment. And it may be used on chrome & plastic trim, or as a top coat over traditional waxes & sealants, too! ● Contains the latest advanced Hybrid Si02 technology ● Seals paint for long-lasting protection against the elements ● Delivers an extreme water beading action ● Applies like a traditional liquid wax & is easy to use ● Non-whitening on non-painted trim and rubber gaskets Applying Hybrid Ceramic Liquid Wax ● One of the biggest mistakes people make when applying a wax is that they apply it too heavily. This only prolongs drying time, makes the liquid wax more difficult to remove and causes you to use more product than necessary. For these reasons, always spread the wax as thin and evenly as possible while still getting full coverage over the paint. ● Shake product well. ● For best results, apply the Hybrid Ceramic Liquid Wax in the shade to a clean, cool surface one section at a time using two overlapping passes to ensure complete coverage. ● Allow 3-5 minutes of initial cure time before removing the liquid wax. ● Remove with a premium microfiber towel like Meguiar's Supreme Shine Microfiber Towel. Please be aware that low temperatures and/or high humidity can prolong the initial curing time. Also, Hybrid Ceramic Wax does not “haze” like traditional waxes. ● Continue until the entire paint surface has been sealed. Not recommended for use on glass.