● Euky Bear Vaporiser Bundle contains the ff:  1 Euky Bear Steam Vaporiser and 1 Euky Bear Sniffly Nose Inhalant (100ml). The bundle no longer contains Vaporiser Cleaning Tablets. There is an alternative way to clean the vaporiser now - with the use of vinegar BUT please read the instructions below on how to clean it. ● Creates all-night natural steam vapours to provide relief ● Raises humidity to healthier levels to make breathing easier (especially in air-conditioned and low-humidity environments) ● 220 volts; Plug of vaporiser is Australian-standard.  Adaptor is not included to keep price at minimum. Please provide your own adaptor.  ● Hygienic: heating to create ‘warm steam’ kills bacteria unlike cool ‘mist’ humidifiers which may expel contaminated water droplets. ● Features a safe, cool-touch water chamber and is specially designed so inhalant is added inside the chamber, out of reach of little fingers. ● Quiet vaporiser - steams silently so it won't disturb your rest. ● Suitable for the whole family - steam helps naturally relieve congestion. Directions for use: IMPORTANT: Ensure vaporiser is unplugged during set up. 1. Twist to unlock heating module (the portion with electrical cord) and remove. 2. Add water to maximum fill line (preferably distilled water, but tap water can be used too) 3. Add Euky Bear Inhalant - you can use Euky Bear Sniffly Nose Inhalant or Sleepytime Inhalant.   Optional: If you still have Euky Bear cleaning tablets, add 1 to 2 tablets. If none, please see new way to clean your vaporiser using white vinegar.  4. Re-insert heating module and lock into place. 5. Plug into power, place on a floor mat at least 1.2 meters away from any person. Once plugged in, it’s automatically on.  Please wait for a few minutes before you’ll see steam coming out of the vaporiser.   6. Unplug to switch it off. How do I clean my Vaporiser after every use? Always switch off and unplug, wait for unit to cool and empty any unused water.  Rinse all parts clean but do not submerge the heating module or power cords in water. Dry with a clean cloth. Maintenance Cleaning - after every ~5 to 10 uses depending on the hardness of your water (presence of mineral deposits in your water):    Put the base of the heating unit in a container with white vinegar - the vinegar should be below the lock. Let it sit for 20 minutes.  Also, clean the opening of the steam vent gently with a cotton bud dipped in white vinegar.  After 20 minutes, wash the base of the heating module in warm soapy water, rinse thoroughly and dry with a clean cloth. The unit shouldn’t smell vinegar when it’s properly rinsed. Hard water areas may need more frequent cleaning. Important Info: NEVER put salt into the vaporiser.