Nikko Flameproof Coating ✔ Specially formulated on a pure silicone resin and heat resin and heat resisting pigment which will give the highest heat resistance. ✔ All colors do not contain lead and mercury and are most suitable for the industrial application where the resistance to high heat of up to 1200F is of prime importance, such as a. exhausting pipe b. heating furnace c. stove Direction of Use: 1. Clean surface thoroughly to be free from rust, dirt and grease. 2. Shake can thoroughly 2 minutes before using and shake periodically during spray. 3. Spray from a distance of about 1 foot. 4. For better result apply several thin coatings with an interval of 10minutes. 5. After spraying turn can upside down and press spray head to clean spray nozzle. Reminder 🧼 Clean the surface, it must be free from oil, rust, and dirt. ( please use degreaser, if needed) 🔥 Heat the surface before spraying. ❄️ Do not spray during cold weather. ⏳ Allow at least 3 days for drying. 𝐈𝐅 𝐘𝐎𝐔 𝐀𝐑𝐄 𝐍𝐎𝐓 𝐒𝐔𝐑𝐄 𝐀𝐁𝐎𝐔𝐓 𝐓𝐇𝐄 𝐏𝐑𝐎𝐂𝐄𝐒𝐒 𝐏𝐋𝐄𝐀𝐒𝐄 𝐃𝐎𝐍'𝐓 𝐇𝐄𝐒𝐈𝐒𝐓𝐀𝐓𝐄 𝐓𝐎 𝐌𝐄𝐒𝐒𝐀𝐆𝐄 𝐔𝐒.