BOYSEN® Plexibond™ PRACTICAL COVERAGE: 5 - 6 square meter/ 4 liters SURFACE DRY: One (1) hour DRY THROUGH: One (1) hour DRY FILM THICKNESS: Approximately 20 mils OVERCOATING INTERVAL: Allow overnight before applying paint THINNING: Not necessary PACKAGING: 4L Surface Preparation: 1. BOYSEN® Plexibond™ #7760 should be applied on bare concrete, wood, or metal NOT PREVIOUSLY PAINTED. 2. Surface should be clean, free from oil, grease, dirt, any loose grit or mortar. Wet Masonry surfaces first with water before applying mix to avoid abrupt drying and cracking of the applied modified cement, especially under hot and sunny conditions. Preparation of Mixture: 1. Mix 6.5 to 7.5 kgs. of cement to 4 liters of BOYSEN® Plexibond™ #7760. 2. To prevent lumping, add cement to Plexibond slowly while stirring. 3. Pass mixture through a fine strainer to sift out lumpy materials. 4. Ensure intimate mixing, stirring as often as possible to avoid settling. Mixture proportion should be kept constant for a uniform texture. 5. Mix only enough material to prevent waste. Workability of BOYSEN® Plexibond™ mixture is 30 minutes, while pot life is 2 hours.