Not available for shipping to Visayas and Mindanao due to airline regulation on liquid content. Bosny Plastic Primer Spray Paint is special formula with best adhesion on plastic substrates such as auto bumpers, spolier, rigid rubber parts, plastic appliances, and various plastic parts. It acts as adhesion primer on most hard to adhere substrates including aluminum, leather, vinyls and most plastics: namely PP, ABS, PS, PE and etc. Can be top coated with acrylic or alkyd paints as desired. Directions for use: 1. Surface should be clean from grease, wax, and dirts. For better results lightly sand surface with sand paper. 2. Shake can well before using. 3. Hold can 12-16 inches from object to be painted. Press spray button firmly. 4. When finished spraying, clean spray nozzle immediately by turning can upside down and push spray button for 10 seconds. Remark: For best results, allow Bosny Plastic Primer Spray Paint to dry for 10 minutes. Then apply top coat color as desired. If Bosny Plastic Primer Spray is left without any top coat over 30 minutes, it should be reapplied to ensure top coat will adhere fully over this primer. CAUTION: 1. Keep from reach of children. 2. Keep away from heat, sparks, and open flames. 3. Do not store at temperature above 120°F or 50°C. 4. Do not puncture or incinerate can. 5. Avoid contact with skin or eyes. Wear goggles and gloves. 6. Prolonged exposure to sun may cause bursting. Pictures shown are for illustration purpose only. Actual product may vary from image. #Chemicals #SprayPaint