Case Parameters: 1.Case size: 326*161*262mm 2.Capacity: 13.8L 3.Material: Aluminum body + tempered glass side panel 4.Case Color: Anodized silver 5.Frame thickness: 2mm,other components thickness: 1.5mm, 2 Side panel thickness: 2mm 6.Front: 1*power switch (including power indicator) 7.Card slot: 4 slots 8.Net weight: about 1.6KG 9.Gross weight: 2.6KG(including package) 10.Package Size: 405*240*340mm Hardware Support: 1.Support ATX, SFX and SFX-L power supply(built-in power extension cable) --The length of ATX power supply suggested within 140mm and 160mm length ATX power supply is also available but it is easy to interfere or difficult to route --If you use ATX power supply, the size limit of motherboard is 244 * 225mm（better use ITX Motherboard） --If you use ATX power supply, the size of graphics card is recommended to be limited 245mm. 2.Support MATX, DTX and ITX motherboards, and the size limit is 244 * 244mm. 3.Support long graphics card within size of 323mm(including IO chip)* 139mm (including power supply wire) *60mm with thickness of 4 slots when installing fan and hard disk on the bottom 4. Air cooling: supports up to 6 Pcs 9025(9225) fans or 3Pcs 12025+1 Pcs 9025(9225) fan On rear window： 1 Pcs 9025(9225) At the top: 2Pcs 9025(9225) or 1Pcs 12025 On the bottom: 3 Pcs 9025(9225) or 2 Pcs 12025 (Note: 9025(9225) fan is recommended, because the installation of 12025 fan is easily affected by the motherboard and hardware wires) 5.Support hard disk: 1*3.5-inch hard disk and 3*2.5-inch solid state hard disk on the bottom Or 1*3.5-inch and 1*2.5-inch hard disk and 1*12025 fan Or 3*2.5-inch hard disks and 2*12025 fans at the same time Or 2*2.5-inch hard disks and 3*9025 fan 6.CPU height limit: 136mm Package Including: 1* C2 Computer Case 1* Switch Wire 1* Screw Accessories Kit #MATX COMPUTER CASE #ITX COMPUTER CASE #ZZAW C2 COMPUTER CASE #ALUMINUM COMPUTER CASE #MATX ITX COMPUTER CHASSIS